EasyManuals Logo
Home>Grandstream Networks>Intercom System>GDS370 Series

Grandstream Networks GDS370 Series User Manual

Grandstream Networks GDS370 Series
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
2. If “Disable Keypad SIP Number Dialing” is checked, users
will be able to open door using private PIN with following
sequence [Private PIN#].
Note: Door can still be opened by Card and with the
sequence [*Virtual Number*Private PIN#].
Unified PIN: Means all members share a same PIN to
unlock the door. Users need to enter the following
sequencefrom the GDS3705 keypad to open the door
[*Local PIN to Open Door#].
Card & Private PIN: Means every member needs to swipe
his card and enter his private PIN to open the door using
the following sequence [Swipe the card + * Private PIN#]
Local PIN to Open Door
Configures PIN stored in GDS3705, input locally this PIN on
the GDS3705 keypad will unlock the door.
This feature needs Private PIN, means every member has a
private PIN, the GDS will record who unlocked the door every
time.
Users need to enter the following sequence from the
GDS3705 to open the door [*Virtual Number*Private PIN#].
Note: When local PIN type is set to private card PIN, users
can also open the door by swiping their cards.
Local PIN to Open Door Schedule
Configure a schedule for the Local PIN to open the door for
“Unified PIN” mode only. Once configured, the door opening
ability using local PIN with turn ON/OFF based on configured
schedule. The schedule can ONLY be edited when “Central
Modedisabled.
Notes: If “Central Modeenabled, the “Schedulepage
cannot be edited. (a green “Central Model” label will display
in top right corner of the UI).
When “Central Modeenabled, the “Schedulewill be edited
in GDSManager and synchronized by pulling from
GDSManager down to GDS3705 device.
Default setting is All Day”.
Enable DTMF Open Door
When enabled, remote SIP phones can open the door while in
call by entering the remote PIN code configured (the PIN
code is sent via DTMF). Default settings is disabled.
Enable Guest PIN Enables password entry for guests.
Guest PIN Configures the password that will be used by guests
Guest PIN Start Time
Selects the start time when the Guest PIN start to take
effect.
Guest PIN End Time Selects the end time when the Guest PIN will stop working.
Disable Auto Answer
If checked, GDS3705 will not answer incoming calls
automatically, users can press any key to answer the call.
Default setting in unchecked.
Enable Doorbell Button to Hang up Call
If checked, Users can hang up an active call when pressing
the doorbell button. Enabled by Default.
Disable Keypad (except the Doorbell Button)
When checked the Keypad will be disabled, only Door Bell
button can be pressed. Disabled by Default.
Enable On Hook After Remote Door Opened When checked calls will be disconnected automatically 5

Other manuals for Grandstream Networks GDS370 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GDS370 Series and is the answer not in the manual?

Grandstream Networks GDS370 Series Specifications

General IconGeneral
BrandGrandstream Networks
ModelGDS370 Series
CategoryIntercom System
LanguageEnglish

Related product manuals