When user enters * as the first digit of the target number, the phone will list all the available feature codes.
• Redial. Redial the last dialed number.
1. Take handset off hook; or
• Press Speaker button; or
• Press Headset button with headset plugged in; or
• Press an available LINE key to activate speaker; or
• When the phone is in idle state;
2. Press SEND key, the last number called will be redialed.
• Via Call History. Dial the number logged in phone's call history.
1. Press MENU button to bring up the main menu then enter Call History; or
2. Press “History” soft key when the phone is in idle state;
3. Select the entry you would like to call using the navigation arrow keys;
4. Press SEND button to dial out.
• Via Phonebook. Dial the number from the phonebook.
1. Press MENU button to bring up the main menu then enter Contacts; or
2. Press “Contacts” soft key when the phone is in idle state;
3. Enter Local / BS Phonebook using the navigation arrow keys;
4. Select the contact you would like to call
Note: Pressing the OK button to enter the contact details page , users can edit the phone number
and choose which account to dial that number by clicking “Edit before dialing” soft key.
5. Press SEND button to dial the selected contact.
Notes:
• After entering the number, the phone waits for the No Key Entry Timeout (Default timeout is 4 seconds,
configurable via Web GUI) before dialing out. Press SEND or # key to override the No Key Entry
Timeout;
• If digits have been entered after taking the handset off hook, the SEND key will works as SEND instead
of showing the history of Dialed extensions;
To Next Page
Loading...
Need help?
General
