• Attended Transfer.
• During active call, press TRANSFER button .
• Dial Transfer destination number and press on dial softkey .
• The first call will be put on Hold and a new call will be initiated with the transfer destination.
• When the second call is answered, Users could press on Switch softkey to switch to the initial
call (The second call will be put on hold) or press on transfer softkey to complete the transfer.
Notes:
• To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains.
• When” Hold Call before Completing Transfer” Option is set to "No" on WEB GUI, the phone will
neither hold the current call in transfer window nor hold the call with the transfer target before referring
the call in the attended transfer.
Call Forwarding
When there is an incoming call, users could choose to not take call and forward it to another number instead
by pressing on the Forward /Transfer softkey and then dial the forward target number and press on
again, the call will be then immediately forwarded to that number.
Establish Conferencing calls
The GRP260x can host up to 5 conference calls.
Initiate a conference call.
1. Establish the first call.
2. While 1 call is active, press on conference Invite softkey and dial the second
conference number.
3. The conference will be established as soon as the dialed number answers the call.
Figure 13 : 3-way conference call screen example
To Next Page
Loading...
Need help?
General
