Grandstream Networks GRP261 Series Administration Guide

P a g e | 101
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
 negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 Memory exception (ERROR level).
Syslog Keyword
Filtering
Syslog will be filtered based on keywords provided. If you enter multiple
keywords, it should be separated by ‘,’. Please note that no spaces are
allowed.
Send SIP Log
Configures whether the SIP log will be included in the syslog messages. The
default setting is “No”.
Note: By setting Send SIP Log to Yes, the phone will still send SIP log from
syslog even when Syslog Level set to NONE.
Show Internet Down
Message
If enabled, the internet down warning message will display when internet is
down. The default setting is “No”.
Auto Recover From
Abnormal
If set to “Yes”, the phone will automatically recover when running abnormal.
The default setting is “Yes”.
Maintenance  TR-069
ACS URL
Specifies URL of TR-069 ACS (e.g.,http://acs.mycompany.com), or IP
address. Default setting is “https://acs.gdms.cloud”
TR-069 Username
ACS username for TR-069.
TR-069 Password
ACS password for TR-069.
Periodic Inform
Enable
Enables periodic inform. If set to “Yes”, device will send inform packets to the
ACS. The valid range is 1 – 4294967295. The default setting is “Yes”.
Periodic Inform
Interval
Sets up the periodic inform interval to send the inform packets to the ACS. The
default value is “86400”.
Connection Request
Username
The username for the ACS to connect to the phone.
Connection Request
Password
The password for the ACS to connect to the phone.
Connection Request
Port
The port for the ACS to connect to the phone. The default value is “7547”.
CPE SSL Certificate
The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key
The Cert Key for the phone to connect to the ACS via SSL.
Randomized TR069
Startup
When enabled, this option allows users to randomize the sending of TR069
INFORM packets. The default setting is “Disabled”.
Maintenance  Security Settings Security
Configuration via
Keypad Menu
Configures the access control for the users to configure from keypad Menu.
There are three different options:

Grandstream Networks GRP261 Series Specifications

General

Brand	Grandstream Networks
Model	GRP261 Series
Category	IP Phone
Language	English