P a g e | 89
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=89randstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
Call Log
Select Account and enter account number in the Value field to access to
the Call Log of that selected account.
Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the
MPK buttons, no field dis required for configuration.
Message
Select this feature in order to display the Message menu from the MPK
buttons, no field dis required for configuration
Selects the account to be used with specific softkey.
Enters a label for softkey.
Specifies value for softkey depending on the mode selected.
Use Auto Location
Service
Configures to enable or disable auto location services on the phone. (Reboot
Required). The default setting is “Yes”.
Enables or disables automatic service update on phone. This configuration
can enable the auto service update only when the Use Auto Location Service
configuration is enabled. Default is “Yes”.
Settings XML Application
Configures the server path to download the idle screen XML file. This field
could be IP address or URL, with up to 256 characters.
Specifies the Softkey name displayed on the idle screen for the users to
enter XML application.
The default Softkey Label is “XMLApp”.
Enters a color to use in HEX format. Default will be transparent.
E.g. #000000. Reference: http://htmlcolorcodes.com
Permits to block auto-switching to call screen when XML application is
running. Default is disabled.
To Next Page
Loading...
Need help?
General
