EasyManuals Logo

Grandstream Networks GXP1400 User Manual

Grandstream Networks GXP1400
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 18 of 60
phones are under the same LAN/VPN. This simulates a PBX function using the CMSA/CD without a SIP
server. Controlled static IP usage is recommended.
To enable Quick IP Call Mode, go to GXP1400/GXP1405 Web GUI->Advanced Setting page, set "Use
Quick IP Call Mode" to "Yes". Click on "Update" on the bottom of the Web GUI page to take the change. To
make Quick IP Call, take the phone off hook first. Then dial #xxx where x is 0-9 and xxx<255. Press # or
SEND and a direct IP call to aaa.bbb.ccc.XXX will be completed. "aaa.bbb.ccc" is from the local IP address
regardless of subnet mask. The number #xx or #x are also valid. The leading 0 is not required (but it's OK).
For example:
192.168.0.2 calling 192.168.0.3 -- dial #3 followed by # or “SEND”;
192.168.0.2 calling 192.168.0.23 -- dial #23 followed by # “SEND”;
192.168.0.2 calling 192.168.0.123 -- dial #123 followed by # “SEND;
192.168.0.2: dial #3 and #03 and #003 results in the same call -- call 192.168.0.3.
Note:
The # will represent colon ":" in direct IP call rather than SEND key as in normal phone call;
If you have a SIP server configured, direct IP call still works. If you are using STUN, direct IP call will
also use STUN;
Configure the "User Random Port" to "No" when completing direct IP calls.
ANSWERING PHONE CALLS
RECEIVING CALLS
Single incoming call. Phone rings with selected ring tone. The corresponding LINE key will flash in
red. Answer call by taking handset off hook, or using Speaker/Headset, or pressing the flashing LINE
key;
Multiple incoming calls. When another call comes in while having an active call, the phone will
produce a Call Waiting tone (stutter tone). The other LINE key will flash in red. Answer the incoming
call by pressing the flashing LINE key. The current active call will be put on hold automatically.
DO NOT DISTURB
Do Not Disturb can be enabled/disabled by pressing the MUTE/DND button on the phone when the phone
is in idle. Or users could set it from phone's Menu following the steps below:

Table of Contents

Other manuals for Grandstream Networks GXP1400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GXP1400 and is the answer not in the manual?

Grandstream Networks GXP1400 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGXP1400
CategoryIP Phone
LanguageEnglish

Related product manuals