Grandstream Networks GXP1400 User Manual

FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 21 of 60
 This will resume the 2-way conversation with the current line.
• Split and Re-conference.
 During the 3-way conference, press HOLD key. The conference call will be split and both calls will
be put on hold separately with 2 LINE keys blinking in green;
 Select 1 LINE key and press to resume the 2-way conversation;
 If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
• End Conference.
 Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
 Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP1400/GXP1405 supports Easy Conference Mode, which can be used combined with the traditional
way to establish the conference.
• Initiate a conference call.
 Establish 1 call;
 Press CONF key and a new line will be brought up using the same account;
 Dial the number and press SEND key to establish the second call;
 Press CONF key or press the ConfCall softkey to establish the conference.
• Split and Re-conference.
 During the 3-way conference, press HOLD key. The conference call will be split and both calls will
be put on hold separately with 2 LINE keys blinking in green;
 Select 1 LINE key and press to resume the 2-way conversation;
 If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
• Cancel Conference.
 If users decides not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key;
 This will end the second call and the screen will show the first call on hold.

Grandstream Networks GXP1400 Specifications

General

Brand	Grandstream Networks
Model	GXP1400
Category	IP Phone
Language	English