FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 28 of 60
• Upgrade
Configures firmware server and config server for upgrading and
provisioning the phone.
• Factory Reset
Resets the phone to factory default settings.
• Layer 2 QoS
Configures 802.1Q/VLAN Tag and priority value.
Factory Functions
Factory Functions sub menu includes the following options:
• Audio Loopback
Speak to the phone using speaker/handset/headset. If you can
hear your voice, your audio is working fine.
to exit audio loopback mode.
• Diagnostic Mode
All LEDs will light up. Press any key
to display the button name in the LCD. Lift and put back
the handset or press Menu button to exit diagnostic mode.
Network
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account
ID and password; Configures IP address, Netmask,
Server 1 and DNS Server 2; Configures 802.1x mode.
Call Features
Configures call forward features for Forward All,
No Answer and No Answer Timeout.
Voice Mails
Displays voicemail message information in the format below:
new messages/all messages (urgent messages/all urgent messages)
Reboot Reboot the phone.
Exit Exit from this menu.
The following picture shows the keypad MENU configuration flow on GXP1400/GXP1405.
To Next Page
Loading...
Need help?
General
