FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 46 of 60
Connection Request Port The port for the ACS to connect to the phone.
CPE SSL Certificate The Cert File for the phone to connect to the ACS via SSL.
CPE SSL Private Key The Cert Key for the phone to connect to the ACS via SSL.
Phonebook XML Download
Configures to enable phonebook XML download. Users could select
HTTP/HTTPS/TFTP to download the phon
ebook file. The default setting
is "No".
Phonebook XML Server Path
Configures the server path to download the phonebook XML. This field
could be IP address or URL, with up to 256 characters.
Phonebook Download Interval
Configures the phonebook download
interval (in minutes). If it's set to 0,
the automatic download will be disabled. The default value is 0. The
valid range is 5 to 720 minutes.
Remove Manually-edited
Entries on Download
If set to "Yes", when XML phonebook is downloaded, the entries added
manually will be automatically removed. The default setting is "Yes".
LDAP Directory: Server
Address
Configures the IP address or DNS name of the LDAP server.
LDAP Directory: Port Configures the LDAP server port.
LDAP Directory: Base
Configures the LDAP search base. This is
the location in the directory
where the search is requested to begin.
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
LDAP Directory: User Name
Configures the bind "Username"
for querying LDAP servers. Some
servers allow anonymous binds in which case the setting can be
left blank.
LDAP Directory: Password
Configures the bind "Password" for querying LDAP servers. The field
can be left blank if the LDAP server allows anonymous binds.
LDAP Number Filter
Configures the filter used for number lookups.
Examples:
(|(telephoneNumber=%)(Mobile=%) ret
urns all records which has the
"telephoneNumber" or "Mobile" field starting with the entered prefix;
(&(telephoneNumber=%) (cn=*)) re
turns all the records with the
"telephoneNumber" field starting with the entered prefix and "cn" field
set.
LDAP Name Filter
Configures the filter used for name lookups.
Examples:
(|(cn=%)(sn=%)) returns all records which has the "cn" or "sn" field