FIRMWARE VERSION 1.0.4.23 GXP1400/GXP1405 USER MANUAL Page 55 of 60
• password=admin:
The admin login password of phone's Web GUI.
SAVING THE CONFIGURATION CHANGES
After users makes changes to the configuration, press the Update button on the bottom of the Web GUI
page. We recommend rebooting or powering cycle the IP phone after saving changes.
REBOOTING FROM REMOTE LOCATIONS
Press the Reboot button on the bottom of the web GUI page to reboot the phone remotely. The web
browser will then display a reboot page with message "The device is rebooting now...". Wait for about 1
minute to log in again.
To Next Page
Loading...
Need help?
General
