P a g e | 38
GXP16XX User Guide
Version 1.0.7.18
Call Waiting/Call Hold
Hold. Place a call on hold by pressing the HOLD button. The active LINE key will blink in green.
Resume. Resume call by pressing the blinking LINE key.
Multiple calls. Automatically place active call on hold or switch between calls by pressing the LINE key.
Call waiting tone (stutter tone) will be audible on new incoming call during the active call.
Mute
During an active call, press the MUTE button to mute/unmute the microphone. The LCD will show the Mute
icon on the top of screen when the call is muted.
Group Listening with Speaker
If the option “Group Listening with Speaker” is enabled on the web UI (refer to the administration guide),
the phone will display a softkey during the call to enable speaker listening along with handset or headset.
Call Transfer
GXP1610/GXP1615/GXP1620/GXP1625/GXP1628/GXP1630 supports Blind Transfer, Attended Transfer
and Auto-Attended Transfer.
Blind Transfer.
1. During the first active call, press TRANSFER and dial the number to transfer to.
2. Press SEND key or # to complete transfer of active call.
Attended Transfer.
1. During the first active call, press LINE key. The first call will be put on hold.
2. Enter the number for the second call in the new line and establish the call.
3. Press TRANSFER.
4. Press the other LINE key which is on hold to transfer the call.
Auto-Attended Transfer.
1. Set "Attended Transfer Mode" to "Dynamic" under Web GUISettingsCall Features. And then
click "Save and Apply" on the bottom of the page.
2. Establish one call first.
3. During the call, press TRANSFER. A new line will be brought up and the first call will be
To Next Page
Loading...
Need help?
General
