P a g e | 40
GXP16XX User Guide
Version 1.0.7.18
End Conference.
Users could press the EndCall soft key or simply hang up the call to terminate the conference call.
Easy Conference Mode
GXP1610/GXP1615/GXP1620/GXP1625/GXP1628/GXP1630 supports Easy Conference Mode, which
can be used combined with the traditional way to establish the conference.
Initiate a conference call.
1. Establish 1 call.
2. Press CONF key and a new line will be brought up using the same account.
3. Dial the number and press SEND key to establish the second call.
4. Press CONF key or press the ConfCall softkey to establish the conference.
Split and Re-conference.
1. During the conference, press HOLD key. The conference call will be split and both calls will be put
on hold separately with 2 LINE keys blinking in green.
2. Select one LINE key and press to resume the 2-way conversation.
3. If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
Cancel Conference.
1. If users decide not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key.
2. This will end the second call and the screen will show the first call on hold.
End Conference.
Users could press the EndCall softkey or simply hang up the call to terminate the conference call. If the
remote party hangs up the call itself, it will be disconnected from the conference but other parties on
GXP1610/GXP1615/GXP1620/GXP1625/GXP1628/GXP1630 will stay in the existed conference.
Notes:
The party that starts the conference call has to remain in the conference for its entire duration, you can
put the party on mute, but it must remain in the conversation.
The option "Disable Conference" has to be set to "No" to establish conference.
When using Easy Conference Mode, use SEND key to dial out the second call instead of using #,
To Next Page
Loading...
Need help?
General
