P a g e | 11
HT813 Administration Guide
Version 1.0.1.2
HT813 Technical Specifications
The following table resumes all the technical specifications including the protocols/standards supported,
voice codecs, telephony features, languages and upgrade/provisioning settings for the HT813.
Table 2: HT813 Technical Specifications
One (1) RJ11 FXS port, One (1) RJ11 FXO PSTN line port with lifeline support
Two (2) 10/100/1000 Mbps ports (RJ45) with integrated NAT router
POWER, FXO, FXS, WAN, LAN.
Caller ID display or block, call waiting, flash, blind or attended transfer,
forward, hold, do not disturb, 3-way conference
G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B,
G.726, iLBC, OPUS, dynamic jitter buffer, advanced line echo cancellation
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711
for Fax Pass-through
Short/Long Haul Ring
Load
3 REN: Up to 1km on 24 AWG
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Busy Tone, Polarity Reversal/Wink, Loop Current
TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, FTP/FTPS, ARP/RARP, ICMP, DNS,
DDNS, DHCP, NTP, TFTP, SSH, Telnet, STUN, SIP (RFC3261), SIP over
TCP/TLS, SRTP, TR-069
Layer 2 (802.1Q VLAN, SIP/RTP 802.1p) and Layer 3 (ToS, Diffserv, MPLS).
In-audio, RFC2833 and/or SIP INFO
HTTP, HTTPS, SSH, FTP, FTPS, Telnet, SSH, TFTP, TR-069, secure and
automated provisioning using AES encryption, syslog
Syslog support, SSH, Telnet remote management using web browser.
https://arttel.ru/
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813