P a g e | 22
HT813 Administration Guide
Version 1.0.1.2
Changing Viewer Password
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 7: Viewer Level Password
Changing HTTP/HTTPS Web Port
1. Access your HT813 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings HTTP(S) Web Port.
5. Make sure that the Web Access Mode is set to HTTP(S).
6. Change the current port to your new HTTP(S) port. Ports accepted are in range [1-65535].
7. Press Apply at the bottom of the page to save your new settings
https://arttel.ru/
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
To Next Page
Loading...
