EasyManuals Logo
Home>Grandstream Networks>Gateway>HT813

Grandstream Networks HT813 Administration Guide

Grandstream Networks HT813
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
P a g e | 52
HT813 Administration Guide
Version 1.0.1.2
Disable Line Echo
Canceller (LEC)
Disables the LEC will per call base. Recommended for FAX/Data calls.
Default is No.
Disable Network
Echo Suppressor
Disables the NEC will per call base. Recommended for FAX/Data calls.
Default is No.
Outgoing Call
Duration Limit
Defines the call duration limit for the outgoing calls, Default is 0 (No limit).
Ring Frequency
Configures ringing frequency for your phone. 15-60 Hz, Default is 20 Hz.
Enable High Ring
Power
Configures a high ringing voltage output for the FXS port of HT813.
Ring tones
Configures the ring tone cadence preferences. User has 10 choices. The configuration,
completed in Distinctive Ring Tones block in the same page, applies to ring tones
cadences configured here.
FXO Port Page Definitions
Table 10: FXO Page
Account Active
Activates / Deactivates the accounts. The FXO port configuration will not change if
disabled, although the port will not be operational, in this state, there will be no dial tone
when picking up the analog phone and making/receiving calls will not be possible.
Primary SIP Server
Configures SIP server IP address or domain name provided by VoIP service provider.
This is the primary SIP server used to send/receive SIP messages from/to HT813.
Failover SIP Server
Specifies failover SIP server IP address or domain name provided by VoIP service
provider. This server will be used if the primary SIP server becomes unavailable.
Prefer Primary SIP
Server
Selects to prefer primary SIP server. The account will register to primary Server if
registration with Failover server expires. Default is No.
Outbound Proxy
Specifies IP address or domain name of outbound Proxy, or media gateway, or session
border controller. Used by HT813 for firewall or NAT penetration in different network
environments. If symmetric NAT is detected, STUN will not work and only outbound
proxy can correct the problem.
Backup Outbound
Proxy
Configures the backup outbound proxy to be used when the “Outbound Proxy”
registration fails. By default, this field is left empty.
Prefer Primary
Outbound Proxy
If the user configures this option to Yes”, when registration expires, the device will re-
register via primary outbound proxy. By default, this option is disabled.
https://arttel.ru/
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

Table of Contents

Other manuals for Grandstream Networks HT813

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks HT813 and is the answer not in the manual?

Grandstream Networks HT813 Specifications

General IconGeneral
BrandGrandstream Networks
ModelHT813
CategoryGateway
LanguageEnglish

Related product manuals