P a g e | 31
HT813 Administration Guide
Version 1.0.1.2
Use STUN to detect network
connectivity
Uses STUN keep-alive to detect WAN side network problems. If keep-alive
request does not yield any response for configured number of times
(minimum 3), the device will restart the TCP/IP stack. If the STUN server does
not respond when the device boots up, the feature is disabled.
Default setting is No.
Use DNS to detect network
connectivity
Uses DNS to detect WAN side network problems. Default setting is No.
Verify host when using
HTTPS
Enables / disables the host verification when using HTTPS.
Firmware Upgrade and
Provisioning:
Upgrade via
Selects firmware upgrade/provisioning method: TFTP, HTTP, HTTPS, FTP, or
FTPS. Default is HTTPS.
Sets IP address or domain name of firmware server. The URL of the server
that hosts the firmware release.
Default is fm.grandstream.com/gs.
Sets IP address or domain name of configuration server. The server hosts a
copy of the configuration file to be installed on the HT813.
Default is fm.grandstream.com/gs.
Decrypts XML configuration file when encrypted. The password used for
encrypting the XML configuration file using OpenSSL.
HTTP/HTTPS/FTP/FTPS User
Name
Enters user name to authenticate with HTTP/HTTPS/FTP/FTPS server.
HTTP/HTTPS/FTP/FTPS
Password
Enters password to authenticate with HTTP/HTTPS/FTP/FTPS server.
Checks if firmware file is with matching prefix before downloading it. This field
enables user to store different versions of firmware files in one directory on
the firmware server.
Checks if firmware file is with matching postfix before downloading it. This
field enables user to store different versions of firmware files in one directory
on the firmware server.
Checks if configuration files are with matching prefix before downloading
them. It allows user to store different configuration files in one directory on
the provisioning server.
https://arttel.ru/
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
To Next Page
Loading...
