31
Special functions
Relay functions
Thermostat is used for time- and temperature controlled additional heating.
See Thermostat 1
6.6.2.7. - Energy saving mode
Energy saving mode switches the heating on when T eco is undershot und heats up to T eco +
hysteresis when solar charge is active.
Settings range: On, Off / Default setting: Off
6.6.2.8. - Periods
Thermostat activity times
Set the desired periods of time when the thermostat should be active. 3 periods can be set per
day, settings can also be copied to other days. Outside the set times the thermostat is switched
off.
Setting range: from 00:00 to 23:59 /default setting: 06:00 to 22:00
6.6.3. - Thermostat 2
To Next Page
Loading...