45
The menus listed below remain completely accessible despite the menu lock being activated, and can be
used to make adjustments if necessary:
1. Measurement values
2. Statistics
6.23. Time&date
7. Menu lock
8. Service values
To lock the other menus, select “Menu lock on”.
To enable the menus again, select “Menu lock off”.
Setting range: on, off/default setting: off
Menu lock, Service values, languages
Menu “7. Menu lock” can be used to secure the
controller against unintentional changing of the
set values.
The menu is closed by pressing “esc” or selecting
“Exit menu lock”.
7. - Menu lock
The menu „8. - Service values“ can be used for remote
diagnosis by a specialist or the manufacturer in the event of
an error, etc.
8. - Service values
9. - Languages
Menu “9. Language” can be used to select the
language for the menu guidance. This is queried
automatically during initial commissioning.
The choice of languages may differ, however,
depending on the device design.
To Next Page
Loading...