4
Safety instructions
By af xing the CE mark to the unit the manufacturer declares that the LTDC conforms to the following relevant
safety regulations:
- EC low voltage directive 2006/95/EC
- EC electromagnetic compatibility directive 2004/108/EC
Conformity has been veri ed and the corresponding documentation and the EC declaration of conformity are kept
on le by the manufacturer.
A.1. - EC declaration of conformity
These installation and operating instructions contain basic instructions and important information
regarding safety, installation, commissioning, maintenance and the optimal use of the unit. Therefore these
instructions must be read completely and understood by the installation technician/specialist and by the
system user before installation, commissioning and operation of the unit.
The valid accident prevention regulations, VDE regulations, the regulations of the local power utility,
the applicable DIN-EN standards and the installation and operating instruction of the additional system
components must also be observed. The controller does not under any circumstances replace any safety
devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the unit may only be carried out by
specialists who possess the appropriate training.
For the user: Make sure that the specialist gives you detailed information on the function and operation of
the controller. Always keep these instructions in the vicinity of the controller.
A.2. - General instructions
Danger
Caution
A.3. - Explanation of symbols
Failure to observe these instructions can result in danger to life from electric voltage.
Danger
Failure to observe these instructions can result in serious damage to health such as
scalding, or even life-threatening injuries.
Caution
Failure to observe these instructions can result in destruction of the unit or the system, or
damage to the environment.
Information which is especially important for the function and optimal use of the unit and
the system.
To Next Page
Loading...