GRAPHTEC midi LOGGER GL220 - Page 38

3−6
CHAPTER 3 Settings and Measurement
19. Data capture bar
(1) During data capture
Displays the elapsed time and the memory usage status.
Remaining time for data capture
Amount of memory used Amount of memory remaining
Total amount of memory
Elapsed time
If, for example, 256 MB USB memory is inserted and about 96 MB is used before data capture, the total
amount of memory is 256 MB, the amount of memory used is about 96 MB, and the amount of memory
remaining is about 160 MB. As time elapses during data capture, the amount of used memory increases
and the amount of remaining memory decreases.
The remaining time for data capture shows a length of time during which data capture is available with the
amount of remaining memory. If the amount of remaining memory is more than 2 GB, however, this part
shows remaining time during which data capture is available with one 2 GB file.
* Remaining time more than 99999 hours is displayed as "++++
:++:++".
(2) During data replay
Displays the display position, cursor position, and trigger position graphically.
Range for which a waveform
is currently displayed
Capture data size
Cursor A position Cursor B position
Name of file being replayed