4-7
CHAPTER 4 Specifications
4.3 Accessory/Option Specifications
Control Software
Item Description
Compatible operating system Windows XP/Vista/Windows 7
Functions Main unit control, realtime data capture, data conversion, data replay
Main unit settings AMP settings, Data Capture settings,Trigger Alarm settings, Report settings,
Other settings
Captured data Realtime data (CSV, Binary)
Internal memory (CSV, Binary)
USB memory (CSV, Binary)
Display Analog waveforms, logic waveforms, pulse waveforms, digital values
Display modes Y-T View, Digital View, Report View, X-Y View between Cursors (only during
replay)
File conversion Between cursors, All data, Thinning function
Monitor functions Alarm monitor enables sending of email to the specified address
Report function Automatic creation of daily or monthly files
Maximum/Minimum The maximum, minimum and current values are displayed during measurement
Accessories
Item Remarks Quantity
Quick Start Guide GL220-UM-8 xx 1
CD-ROM GL220-CDM 0 x M (User's Manual, Application software) 1
AC adapter 100 to 240 VAC, 50/60 Hz, one set of region-specific power cables 1
Battery Pack B-517 (Option)
Item Description
Capacity 7.4V/2200mAh 17Wh
Running time When using the LCD display: approx. 5 hours
When using the screensaver: approx. 6 hours
Note: When capturing to internal memory at 1 s, sampling, using new battery
packs at +25°C environment.
Note: The running time depends on such as the operating environment, the
amount of charge left in the battery and connecting USB memory.
Battery type Lithium secondary battery
Charging method Mount in the main unit, or use a separate battery charger
Time required for charging Main unit: approx. 4 hours
Switchover in the case of a
power failure
Because the battery is used together with the AC adapter, the power supply
will be switched automatically to the battery in the event of a power failure.
Note: The AC adapter is the primary power source.
Operation environment Running on battery: 0 to 40°C, Battery being charged: 15 to 35°C
Other functions When the battery is running low, measured data is saved and the file is clised
automatically (during internal memory and USB memory capture).
The remaining battery power is displayed.
To Next Page
Loading...