4-2
CHAPTER 4 Specifications
4.1 Standard Specifications
Standard Specifications
Item Description
Number of analog channel 10 channels
External input/output Trigger input or external sampling pulse/logic input 4 channels or pulse input 4
channels, alarm output 4 channels
PC interface USB (Full speed) standard
Internal memory device Approx. 2 GB internal memory
USB memory slot (Full speed supported) standard
Data backup functions Setup conditions: EEPROM; Clock: Lithium battery
Clock accuracy
(ambient temperature 23°C)
± 0.002% (approx. 50 seconds per month)
Operating environment 0 to 45°C, 5 to 85%RH (0 to 40°C when operated in batteries/15 to 35°C when
battery is charging)
Withstand voltage Between each input channel and GND: 1 minute at 350 Vp-p
Between each input channels: 1 minute at 350 Vp-p
Power supply AC adapter: 100 to 240 VAC, 50/60 Hz
DC input: 8.5 to 24 VDC (max. 26.4 V)
Battery pack (option): 7.4 VDC (2200 mAh)
Power consumption AC power consumption (when the supplied AC adapter is used)
No. Condition Normal
consumption
During recharging
battery
1 When the LCD is ON 12VA 29VA
2 When the screensaver is operating 11VA 28VA
DC power consumption
No DC
voltage
Condition Normal
consumption
During recharging
battery
1 +24V When the LCD is ON 0.18A 0.6VA
2 +24V When the screensaver is
operating
0.15A 0.57VA
3 +12V When the LCD is ON 0.31A Recharging
battery is not
possible.
4 +12V When the screensaver is
operating
0.26A Recharging
battery is not
possible.
5 +8.5V When the LCD is ON 0.45A Recharging
battery is not
possible.
6 +8.5V When the screensaver is
operating
0.37A Recharging
battery is not
possible.
* Normal condition: LCD brightness is set to MAX.
External dimensions 194×117×42 mm
Weight*1 520g
Vibration-tested conditions Equivalent to automobile parts Type 1 Category A classification
*1 Excluding the AC adapter and battery
To Next Page
Loading...