GRAPHTEC midi LOGGER GL220 - Time;DIV; Menu; Quit (Local); Direction Keys

3−8
CHAPTER 3 Settings and Measurement
(2) TIME/DIV
Press the left/right key of the TIME/DIV key to change the time axis display width.
(3) MENU
Open the settings window to capture data. For details on settings, see “3.4 Setting
Menus” on page 3-16.
(4) QUIT (LOCAL)
This key is primarily used for the following operations.
•Tocancelasettingduringmenuconguration.
•ToreturntotheMONITORwindowwhentheSPAN/TRACE/POSITIONwindowisdisplayed.
•Tocancelremotestatus(inwhichkeysaredisabled)throughinterfacecontrol.
•Toclosethemenuscreen.
•Toquitdatareplay.
(5) Direction keys
This key is primarily used for the following operations.
•Tomoveamenuorsettingitemduringmenuconguration.
•Tomovethecursorduringreplay.
•TomovetheactivechannelintheWaveform+DigitalandDigital+CalculationDisplay
screens (
keys).
•TochangethesettingofSPAN/TRACE/POSITION( keys).
•TochangetheQuicksetting( keys).
•TochangethechanneltobedisplayedintheDigital+CalculationDisplayscreen( keys).
(6) ENTER
This key is primarily used for the following operations.
•Tonalizesettingitemsduringmenucongurationoropensubmenus.