4-10
Color Correction
Perform color correction if there is any discrepancy in color in parts of the scanned image
even after you have calibrated the scanner.
Caution
• Handle the color correction sheet with care so that it is does not get soiled, bent
or scratched. A soiled, bent, or scratched sheet will not give good results.
• The color correction sheet is a consumable item. It cannot be used if it is bent or
soiled.
• The color correction sheet is a paper product. Do not attempt to clean it with any
type of liquid cleaner.
Color correction sheet
Insertion direction
Scanner
(1) Display the Scanner menu.
Select Color Correction.
(2) The following screen is displayed. Click the [Scan] button.
(3) The following prompt is displayed. Insert the color correction sheet into the scanner as
instructed.
C
heckpoint
Position the color correction sheet so that the red bar in the center of the
sheet is centered in the scanner.
(4) Click the [OK] button to start scanning.
The scanned data is displayed when scanning is complete. Colors may differ slightly for
individual sensors, but this does not indicate a defect.
To Next Page
Loading...
