GRAPHTEC CSX300-09 User Manual

CSX300-09
USER’S MANUAL
MANUAL NO. CSX300-UM-151
IMAGE SCANNER

GRAPHTEC CSX300-09 Specifications

General

Brand	GRAPHTEC
Model	CSX300-09
Category	Scanner
Language	English

Summary

TO ENSURE SAFE AND CORRECT USE

SAFETY PRECAUTIONS

Installation Precautions

Guidelines for safely installing the scanner, avoiding hazards.

Power Supply Precautions

Handling Precautions

Maintenance and Inspection Precautions

CHAPTER 1 BEFORE USING THE SCANNER

Front View and Control Panel

Identifies and describes the scanner's front components and control buttons.

Rear View

Identifies and describes the scanner's rear connectors and ports.

1.3 Assembling the Scanner

Instructions for attaching optional document support plates and cable clamp.

CHAPTER 2 CONNECTION AND PREPARATIONS

2.1 Connecting to the Power Supply

Procedure for connecting the scanner's power cable to an outlet.

2.2 Turning the Power On and Off

How to power the scanner on and off using the power button.

2.4 USB Connection

Steps for connecting the scanner to a computer via USB.

2.5 Installing the Driver Software

Instructions for installing scanner drivers on Windows Vista, XP, and 2000.

2.7 Installing the Scanning Master 21+ Application

Guide for installing the bundled scanning software.

CHAPTER 3 LOADING A DOCUMENT

3.1 Compatible Document Types

Details on acceptable document sizes, lengths, thicknesses, and grades.

3.2 Loading a Document

CHAPTER 4 DAILY MAINTENANCE

4.2 Cleaning the Feed Rollers

4.6 Cleaning the Image Sensors (Transparent Contact Plates)

4.9 Scanner Calibration

CHAPTER 5 TROUBLESHOOTING PROCEDURES

5.1 The scanner Is turned on but doesn't operate at all

5.2 The scanner operates improperly after connection to the computer

5.3 The control panel's red ERROR LED is lit

5.4 The control panel's red ERROR LED is flashing