2-6
2.5 Installing the Driver Software
C
heckpoint
The procedure outlined below is based on the requirement that you are logged on to
Windows with administrator rights. Consult your Windows manual and Windows Help for
more information.
For Windows Vista
(1) Use the USB cable to connect the scanner to the computer, and then turn on the
computer.
(2) When Windows starts up, insert the CD-ROM supplied with the scanner into the CD-
ROM drive.
(3) Turn on the power to the scanner.
(4) The screen shown below is displayed. Click "Locate and install driver software
(recommended)".
(5) The User Account Control screen is displayed. Click [Continue] to proceed with the
installation.
(6) The screen shown below is displayed. Click "Don't search online".
(7) The screen shown below is displayed. Click "I don't have the disc. Show me other
options."
To Next Page
Loading...
