4-3
4.3 Cleaning the Document support Rollers
(1) Turn off the scanner.
(2) Open the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
(3) While rotating the document support rollers, wipe them clean using a soft cloth that has
been moistened with water or a neutral detergent (diluted with water) and firmly wrung
out.
Document support rollers
(4) Wipe the document support rollers once again using a soft, dry cloth to remove all the
moisture.
(5) Close the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
Caution
•Take care not to get your fingers caught in the top cover.
• Scanning may be affected if the document support rollers becomes scratched or
dirty.
To Next Page
Loading...
