4-2
4.2 Cleaning the Feed Rollers
(1) Turn off the scanner.
(2) Open the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
(3) While rotating the feed rollers, wipe them clean using a soft cloth that has been
moistened with water or a neutral detergent (diluted with water) and firmly wrung out.
Feed rollers
(4) Wipe the feed rollers once again using a soft, dry cloth to remove all the moisture.
(5) Close the top cover as described in Section 4.1, “Opening and Closing the Top Cover”.
Caution
Take care not to get your fingers caught in the top cover.
To Next Page
Loading...
