3-63
CHAPTER 3 Settings and Measurement
After making sure that the device name is displayed, be sure to press the [OK] to reect the settings.
After the settings are completed, turn Off the GL100-WL’s and GL240’s powers and then start up the
GL100-WL’s power. When the following screen is displayed, the connection is completed.
Connecting to wireless 1
Connecting to GL100-WL
When the data of the GL100-WL and the GL240 are captured, a few of the data may be delayed by reason of
the data processing of the GL100-WL and the connected GL sensor and terminal/adapter.
Please consider the data lag when the data is tried to confirm and replay.
To Next Page
Loading...
