12
LUBRICATION AND MAINTENANCE
LUBRICATION
• Do not let excess grease collect on or
around parts, particularly when operation
in sandy areas.
• Lubricate the disc hub and the disc fork
pivot every 8 hours of usage with a grease
application of ½ to 1 stroke applied
slowly.
• Use an SAE multipurpose type grease for
all locations shown. Be sure to clean fitting
thoroughly before using grease gun.
DISC INSPECTION
Do not handle disc with bare hands.
Use heavy leather gloves or other
protective material over the disc’s
edge when removing disc. Careless
or improper handling may result in
serious injury.
• Inspect disc before each use to determine
that it is mounted securely and is in good
condition. Replace any disc that is bent,
cracked or excessively worn.
CAUTION
To Next Page
Loading...
