Grasslin talento easy B1 - Creating Automatic Switching Programs

98
EN
3. Select NEW and conrm with the button.
4. The automatically assigned program number will be displayed briey.
5. Select
SWITCH and conrm with the button.
SWITCH is only displayed if multi function has been activated for automatic mode, cycle
mode and pulse mode (Ä Chapter “Activating multi function” on page90).
6. Start - select day(s) of the week on which the switching program is to be carried out and conrm
with the
button.
The days of the week 1 – 7 are set by default. Individual days of the week can be set as
follows:
Days of the week can be selected with the
button.
Days of the week can be deselected with the
button.
7. Start time – select hours and conrm with the
button.
8. Start time – select minutes and conrm with the
button.
9. End - select day(s) of the week on which the switching program is to be ended and conrm with the
button.
The days of the week 1 – 7 are set by default. Individual days of the week can be set as
follows:
Days of the week can be selected with the
button.
Days of the week can be deselected with the
button.
10. End time – select hours and conrm with the
button.
11. End time – select minutes and conrm with the
button.
12. Select
ACTION ON/OFF for whether the channel is to be switched on or off.
Entry Result
ACTION ON The channel is switched on.
ACTION OFF The channel is switched off.