To Next PageTo Next Page
Need help?Do you have a question about the GRAUPNER HoTT SMART-BOX and is the answer not in the manual?
General| Brand | GRAUPNER |
|---|---|
| Model | HoTT SMART-BOX |
| Category | Automobile Electronics |
| Language | English |
Lists available setup configurations for transmitter, receiver, and telemetry sensors.
Notes the ability to update the SMART-BOX firmware via USB for future functions.
Warns about potential conflicts and data overwrites between transmitter and SMART-BOX settings.
Details the physical connection of the SMART-BOX to the transmitter using the provided cable.
Explains how to use the four buttons (ESC, ENTER, DEC, INC) to navigate menus and select parameters.
Details settings for TX VOLT, ALARM VOLT, COUNTRY, and RANGE TEST parameters.
Displays live receiver status like signal quality, strength, temperature, and voltages.
Covers channel selection, reverse, center, trim, and travel adjustments for servos.
Allows setting fail-safe modes, positions, delays, and saving configurations for safety.
Configures free mixers and wing mixers for advanced control mixing between channels.
Sets up exponential curves for servo response to control inputs for finer control.
Allows testing servo travel limits, voltage warnings, and temperature limits.
Explains graphical displays for AIRPLANE and CAR models, showing various sensor data.
Details connecting the PC, selecting software, and initiating the firmware download process.
Declares conformity with essential protective requirements for electromagnetic interference.
Provides instructions for the environmentally sound disposal of the product and batteries.
Details the 24-month warranty terms and conditions for the SMART-BOX product.
Lists optional accessories and their order numbers for enhancing the SMART-BOX system.
