9 / 19
3974_MP_V3
The 16 channel digital switch module has been developed for use in
RC models and it should only be used for the previewed scope.
Please note that the module should only be used within the indicated
limit values (see technical data).
Use and store the unit in a dry environment only.
Every mechanical or electric modification of the module or the tres-
passing of the indicated limit values brings immediately to loss of all
dispute rights against the producer, including the warranty service.
Any damage on the warranty seal on the back part of the module also
brings to an immediate loss of waranty.
Always proof the correct functions of the module before every use.
Installing the module
The best solution is to fix the module through some double-sided
adhesive tape or hook and loop tape in the model.
Never open the housing and always plug in and out the switched off
components. This will prevent damage to the module and the receiver.
To Next Page
Loading...
Need help?
General
