Need help?Do you have a question about the Gravely 891007 and is the answer not in the manual?
General| Brand | Gravely |
|---|---|
| Model | 891007 |
| Category | Lawn and Garden Equipment |
| Language | English |
Register your unit with the dealer or online at gravely.com using model and serial numbers.
Read and understand all manuals provided with the unit before operation or service.
Gravely reserves the right to change products without notice.
Identifies the safety alert symbol and its meaning: ATTENTION! YOUR SAFETY IS INVOLVED!
Explains signal words (Danger, Warning, Notice, Important) used in manuals and on decals.
Practice safe working precautions and learn applicable local rules and laws.
Read and understand the Operator's Manual and decals for safety and proper use.
Visual reminders of important safety information on the unit. Always replace missing decals.
Read, understand, and follow all instructions on the machine and in manuals before starting.
Do not allow children under 18 to operate equipment; consider age-related risks for older operators.
Be alert to children's presence; never carry children; keep them out of the mowing area.
Wear appropriate clothing, footwear, and eye/ear protection; avoid loose items.
Ensure guards are in place, safety interlocks work, and counterweights are installed if needed.
Exercise extreme caution on slopes; do not operate on slopes over 10 degrees.
Follow manufacturer recommendations for weight limits and towing procedures.
Follow recommendations for wheel weights or counterweights.
Check kit contents against the parts list and Figure 3 before assembly.
Instructions for installing bagger mounts to the rear bumper mounts.
Steps to assemble the bagger, including arms, posts, and latches.
Procedure for installing the V-belt onto the blower assembly and idler pulley.
Steps for installing the hose adapter using specified bolts and nuts.
Instructions for mounting the blower assembly onto the mower deck.
Procedure for installing the V-belt on the double pulley system.
Steps to connect the hose between the bagger assembly and the hose adapter.
How to install the grass bags into the bagger assembly, noting heat-resistant side.
Routing the rope through the bagger arms and eye bolts for securing.
Check bagger parts, counterweights, hardware, hose, and bags before operating.
Starting and stopping procedures, throttle settings, and ground speed for bagging.
Procedure for safely emptying full mesh bags after stopping the engine.
Safety precautions and steps for clearing clogs in the bagger or blower assembly.
Tips for efficient bagging, such as cutting dry grass and using full throttle.
Schedule for checking fasteners, bagger parts, unit cleaning, and V-belt inspection.
Ensure all hardware, including belt cover wing nuts, is tight before use.
Inspect bagger for wear, abrasion, or structural damage; replace worn parts.
Clean the bagger before and after each use.
Check V-belt tension and wear after initial use and every 10 hours.
Step-by-step instructions for removing and installing a new V-belt.
How to adjust V-belt tension by adding or removing washers from the compression spring.
Proper procedures for cleaning and storing the unit, including precautions.
Common problems like bagger not picking up or blower stopping, with probable causes and corrections.
Key specifications for the 2-Bag Bagger, including model number and capacity.
Details special warranty extensions for specific components like mower deck shell and frame.
Lists items and conditions not covered by the warranty.
Outlines customer duties for maintaining the product and obtaining warranty service.
Provides contact information and websites to locate authorized service centers.
Details specific parts, damage, and usage types excluded from warranty coverage.
To Next Page
