Section 6
Using Text Messaging 109
4. Press the button to “Send”.
5. To create your own message use the “Up/Down” button and scroll until
“Customize” appears. Press the button and use the keypad to type your Text
Message.
6. To use the Jitterbug Library of pre-written Text Messages, use the “Up/Down”
button to scroll until “Library” appears. Press the button and again, use the “Up/
Down” button to scroll through and nd the desired message.
7. Press the button when you are done typing your message. You will automatically
go to your Phone Book. Use the “Up/Down” button to scroll through your contacts.
8. Press the button when the contact to whom you wish to send the Text
Message is in the middle of your Inside Display.
9. After you press the button, you will see the words “Sending Message” on the
Inside Display.
To Next Page
Loading...
