Section 5
90 Using The Camera
Taking A Photo With Your Jitterbug
1. Starting from the main screen, use the “Up/Down” button and scroll until
“Camera” appears highlighted in gray in the middle of the Inside Display.
2. Press the button to open the camera.
3. Make sure that the image you would like to capture appears on the Inside Display.
4. Press the button to capture the image.
5. Press “Yes” to store your photo. “Photo Successfully Saved” will appear on the Inside Display.
6. Press “No” to delete your photo and return to the camera.
Any photo saved on your Jitterbug will be stored in a photo gallery called “My
Photos.”
NOTE:
To Next Page
Loading...
