Section 1
Getting Started 37
To Install The Battery
1. Hold the battery with the Samsung logo facing up, slide the battery into the
back of your Jitterbug so the gold contacts on the side of the battery connect
with the gold pins inside the phone.
2. Push the battery into place.
3. Place the cover over the back of the phone so the hinges align with the slots
near the top of the phone.
4. While holding the phone with both hands
place your thumbs on the Samsung logo.
Make sure the logo is facing right-side-up.
Push the Battery Cover up while squeezing
the phone. The Battery Cover will click into
place.
To Next Page
Loading...
