Floor Ceiling Air-Conditioning Unit
32
All
on/All
offAll
on/Al
off
All
on/All
offAll
on/Al
off
Quit this setting status automatically 30
seconds later or by pressing “Shield”
once.
Press “Confirm/Cancel” to
activate / deactivate the shielding
function.
Fig.7.19 “ON/OFF” Shield under the Centralized Control
7.3.7.8 “ALL” Shield under the Centralized Control
It is available to activate or deactivate the “ALL” shield for the centralized control: rst press
“Shield” with “SHILED” displayed on the LCD, next press it to switch to “ALL”, then press “Central”
with “CENTER” displayed on the LCD and then press “Conrm/Cancel”, after that, “ALL” will go on
or go out and quit this setting status at the same time.
See Fig.7.20 for “ALL” shield under the centralized control:
Under the single control status, press
“Shield ” to switch to “ALL” .
Press “Central” to go to the shielding
setting status under the centralized
control .