E-Smart Zone Controller
14
（
3
）
Absence function can only be turned on in heating mode. When absence
function is on, set temperature is 8
℃
.
（
4
）
Rapid cooling function can only be effective in cool mode. Likewise, rapid
heating function can only be effective in heat mode.
（
5
）
When shield all function is on, other shield buttons will be invalid.
Note: When the centralized controller matches different air conditioning units,
some functions will vary.
Fig.3.2 Advance Page
3.2.3 Timer Setting
Press timer button to enter timer setting list page(Fig. 2.2).
Press timer option zone button of timer list (timer ON/OFF, set information
repeatedly) to enter timer editing page;
Fig. 3.3 Timer Editing Page
To Next Page
Loading...
