Gree D Series - Page 24

D Series Modular Air-cooled Scroll Chillers
19
y
Timer Setup
Select
Timer Setup
and press
Conrm
to go to the page as shown in the following drawing:
Press
Conrm
to change a selected object. Press
Up or Down
to change value or state of a selected
object. This is timing on/o󰀨 time and e󰀨ective status each week.
“OFF”
represents the time set is invalid
and
“ON”
means a valid time set. Press the
Exit
button to quit the page and go back to the previous menu
and save set values.
y
Clock Setup
Select
Clock Setup
and press the
Conrm
button to go to the page. The following display is present on
the screen.
Clock Setup
20XX-XX-XX
XX:XX
XXX
Press the
Conrm
button to change a selected object. Press the
Up or Down
button to change value
or state of a selected object. Press the
Exit
button to quit the page and go back to the previous menu and
save set values.
y
Sound On set
Select
Sound
, press the
Confirm
button, and the subsequent
“ON” or “OFF”
, which means the
function is selected or not.
y
Backlight On Set
Select
Backlight,
press the
Conrm
button, and the subsequent
“ON” or “OFF”
, which means the
function is selected or not.
y
ECO.Mode Set
Select
ECO.Mode
, press the
Conrm
button, and the subsequent
“ON” or “OFF”
, which means the
function is selected or not.
y
Quiet Mode Set
Select
Quiet Mode
, press the
Conrm
button, and the subsequent
“ON” or “OFF”
, which means the
function is selected or not.
y
Memory Start Set
Select
Memory Start
, press the
Conrm
button, and the subsequent
“ON” or “OFF”
, which means the
function is selected or not. The function is for selecting whether the unit will memorize its operation state if
power supply is shut down.