163
6.2.3 One-way cassette type
◆ Assembly and Disassembly of the Water Pump
Remark: Prior to the assembly of the drainage pump, make sure the power supply is cut off.
Steps Illustrations Operation Instructions
1. Remove the front
panel.
Slight press the locks at both
ends of the front panel to open
one side of it, and then undo
three clasps to open the other
side of the panel, after that,
remove the panel upward
away from the unit.
2. Unscrew the fixed
screws
Unscrew the fixed screws of
the front panel and main body
of the unit
3. Remove the front
panel assembly.
Remove the front panel
assembly upward away from
the unit.
4. Unscrew the fixed
screws
Unscrew the screws around
the drain pan
5. Remove the drain
pan and the bracket
of the filtering
screen.
Remove the drain pan and the
bracket of the filtering screen
upward away from the unit.
To Next Page
Loading...
