116
DC Inverter Multi
VRF Service Manual
Disassembly and Assembly of Motor and Fan Blades
Remark: Be sure to cut off power supply before disassembling motor and fan blades
Procedures Dirgrams Operating Introductions
1. Disassemble
the front grille
5HPRYHWKH¿[HGVFUHZVRQWKH
front grille by using a screwdriver;
2) Remove the grille.
2. Disassemble the
outer casing.
5HPRYHWKH¿[HGVFUHZVRQRXWHU
casing by using a screwdriver;
2) Remove the outer casing and
SODFHLWRQWKHÀRRUKRUL]RQWDOO\
3. Disassemble
the fan blades
5HPRYHWKH¿[HGVFUHZVRQWKH
fan blades by using a spanner;
2) Remove the fan blades and place
WKHPRQWKHÀRRUKRUL]RQWDOO\
4. Disassemble
the bad motor.
5HPRYHWKH¿[HGVFUHZVRQ
the motor by using a spanner;
2) Disconnect the power
cord to the motor;
3) Take out the bad motor