30
Technical Information
Service Manual
Signal sender
Battery
Cover of
battery box
Remove
Reinstall
Press this button under cooling, heating mode can start up sleep function.
Press this button again to cancel sleep function. " "icon on remote controller will be displayed.
" " icon will be displayed on remote controller.
If “H1” is displayed on the remote controller while it’s not operated by the professional person/after-sales person, it belong
s to the
misoperation.
Please operate it as below to cancel it.Under the OFF status of remote controller, hold the “MODE” button and “X-FAN” buttons
simultaneously for 5s to cancel “H1” display
.
Note:
● If remote controller displays “H1”, it belongs to the normal function reminder. If the unit is defrosting under heating mode
,
it operates according to H1 defrosting mode. “H1” won’t be displayed on the panel of indoor unit
;
● Once you set H1 mode, if you turn off unit by remote controller, H1 will display 3 times on the remote controller and then
disappear;
● Also, when you set H1 mode, when you change to heating mode, H1 will display 3 times on the remote controller and then
To Next Page
Loading...
