A. Drain port
B
. Drain hose clamp
DRAINAGE METHOD
-8-
A
B
When COOL or DRY is running, condensate will drain to water tank. When water tank
is filled, Buzzer will sound 8 times, LED window show error code "H8".
In this case, plug out drain hose from fixing clamp,unsecure the clip, pull
out the rubber plug from the drain hose, then drain out water in tank.
Then reinstall the drainage hose as step 4 to step 5 in page 7.
The unit will resu-merunning when water filled protect released and compressor
stops for 3 minutes.
To Next Page
Loading...
