Ŗ
HOW TO USE THE REMOTE CONTROL
-16-
For good receive, the distance between
operator and the unit no more than 5
meters.
Point the remote control towards
the units signal receiver window
and press the desired button. A
beep will sound when the unit re-
ceives the signal.
Ŗ Make sure nothing, such as curtains,
blocks the signal receiver window.
CAUTION
Ŗ Do not expose the signal receiver window to direct sunlight. This may adversely affect
its operation. If necessary, close the curtains to block out the sunlight.
Ŗ Use of a fluorescent lamp in the same room may interfere with transmission of the signal.
Ŗ The unit may be affected by signals emitted from other remote controllers for tel-evisions,
VCRs or other equipment used in the same room.
Ŗ Do not leave the remote control exposed to direct sunlight or near a heater. Pro-tect the
remote control from moisture and shock which can discolor or damage it.
To Next Page
Loading...
