99
Installation and Maintenance
Service Manual
11.2 Removal Procedure of Outdoor Unit
GWC24QEXF-D3DNC4C/O   GWH24QEXF-D3DNC4C/O
NOTE:Take heat pump for example.
Step Procedure
    1. Before disassembly
   2. Remove Cover of Pass Wire and valve cover
Remove the screws fixing Cover of Pass Wire
, 
valve 
cover and then remove them.
   3. Remove top cover
Remove the screws xing top panel  and then  remove 
the top panel.
valve cover
top cover
Caution: discharge the refrigerant 
completely before removal.
Cover of 
Pass Wire