Gree GWH07AWAXA-K6DNA1C

59
Technical Information
Service Manual
6. Function and Control
6.1 Remote Controller Introduction for YAP1F7
Buttons on remote controller
TURBO
FAN
MODE
ON/OFF
I FEEL
T-ON T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
P
TURBO
FAN
MODE
ON/OFF
I FEEL
T-ON T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
P
Introduction for icons on display screen
Set temperature
WiFi function
Sleep mode
Health mode
Scavenging function
8℃ heating function
Power limiting operation
X-FAN function
Left & right swing
Up & down swing
Child lock
Quiet
Set temp.
temp.
Outdoor ambient
temp.
Indoor ambient
Clock
Operation mode
Set time
TIMER ON / TIMER OFF
Turbo mode
Send signal
Auto mode
Cool mode
Temp.
Dry mode
Fan mode
Heat mode
display type
I feel
Set fan speed
P
Introduction for buttons on remote controller
NOTE:
1. This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which the
model doesn't have, if press the corresponding button on the
remote controller, the unit will keep the original running status.
2. After putting through the power, the air conditioner will give out
a sound. Operation indicator "
" is ON (red indicator, the colour
is different for different models). After that, you can operate the
air conditioner by using remote controller.
3. Under on status, pressing the button on the remote controller,
the signal icon "
" on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
4. As for the models with functions of WiFi or wired controller,
the indoor unit must has been controlled by standard remote
controller under auto mode first, and then the function of
adjustable temperature under auto mode can be realized by APP
or the wired controller.
5. This remote controller can adjust the temperature under
auto mode. When matching with the unit which is without the
function of adjustable temperature under auto mode, the set
temperature under auto mode may be invalid, or the displayed
set temperature on the unit is not same as that on the remote
controller under auto mode.
button
Press this button to turn on the unit. Press this button again to turn
off the unit.
button
Press this button to select your required operation mode :
● When selecting auto mode, air conditioner will operate automatically
according to the ex-factory setting. Press "FAN" button can adjust fan
speed. Press "
" / " " button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool
mode. Press "
" or " " button to adjust set temperature. Press
"FAN" button to adjust fan speed. Press "
" / " " button to adjust
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Under dry mode, fan speed can't be
adjusted. Press "
" / " " button to adjust fan blowing angle.