Gree GWH07AWAXA-K6DNA1C

69
Technical Information
Service Manual
6.3 Remote Controller Introduction for YAW1F10
Introduction for icons on display
Buttons on remote controller
Introduction for buttons on remote controller
Notice:
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which the
model doesn't have, if press the corresponding button on the
remote controller, the unit will keep the original running status.
● After putting through th epower, the air conditionerwill give out
a sound. Power indicator "
" is ON. After that, you can operate
the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon "
" on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
● As for the models with functions of WiFi or wired controller,
the indoor unit must has been controlled by standard remote
controller under auto mode first, and then the function of
adjustable temperature under auto mode can be realized by APP
or the wired controller.
● This remote controller can adjust the temperature under auto
mode. When matching with the unit which is without the function
of adjustable temperature under auto mode, the set temperature
under auto mode may be invalid, or the displayed set temperature
on the unit is not same as that on the remote controller under
auto mode.
button
On/Off
Press this button to turn on the unit. Press this button again to
turn off the unit.
button
Mode
Each time you press this button, a mode is selected in a
sequence that goes from AUTO, COOL, DRY, FAN, and HEAT,
as the following:
AUTO COOL DRY FAN HEAT
Notice:
● Heat mode: Only for models with heating function.
● Under auto mode, temperature can be displayed; Under auto
mode, set temperature can be adjusted.
button
Fan
This button is used for setting Fan Speed in the sequence that
goes from AUTO,
, , , , , to , then back
to Auto.
Notice:
● Fan speed under dry mode is low speed.
Operation mode
Set fan speed
Turbo mode
Indoor ambient temp
Send signal
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Sleep mode
X-FAN function
Light
I feel function
WiFi function
8℃ heating function
Child lock
Set temperature
Up & down swing
Set time
TIMER ON / TIMER OFF
FAN
AUTO
FAN
AUTO
Fan
OPER
Swing
ModeOn/Off
Sleep Temp
Turbo
X-Fan
Light
Timer I Feel