Gree GWH09QB-K3DNC2G

96
Installation and Maintenance
Service Manual
a
b
Procedure
Step
Remove the screws on the electric box
cover 2 and detecting plate(WIFI), then
remove the electric box cover 2 and
detecting plate(WIFI).
Note:
The position of detection board
（
WIFI
）
may be different for -different models.
Remove the screws xing front case.
Note:
1.Open the screw caps before removing
the screws around the air outlet.
2.The quantity of screws fixing the front
case sub-assy is different for different
models.
Loosen the connection clasps between
vertical louver and bottom case to remove
vertical louver.
Loosen the connection clasps between
front case sub-assy and bottom case. Lift
up the front case sub-assy and take it out.
Electric box cover 2
Detecting plate
(WIFI)
Screw
Screws
For 12K For 09K
4. Remove electric box cover 2 and detecting plate(WIFI)
5. Remove front case sub-assy
6. Remove vertical louver
Front case
sub-assy
Clasps
Screws
Screw
Vertical
louver
Vertical
louver
Clasps
Bottom
case