44
Installation and Maintenance
Service Manual
Turn off the unit,without Timer
activated
Press Timer repeatedly unitll go
to the setting status
Press ▲/▼ to adjust the time
Press Enter/Cancel to conrm this settingPress Timer to cancel this setting
• Timer off setting:
Under on-state of the unit without timer setting, if Timer button is pressed, LCD will display xx. Hour,with OFF blinking. In this case,
press▲ or ▼ button to adjust timer on and then press Timer to conrm.
• Cancel timer:
After setting of timer, if Timer button is pressed, LCD wont display xx. Hour so that timer setting is canceled.
Timer off setting under the “On” state of the unit is shown as Fig.3.5.1.
Fig.3.5.1 Timer off Setting under the “On” State of the Unit
Fig.3.5.2 Timer on Setting under the “Off” State of the Unit
Timer on setting under the “Off” state of the unit is shown as Fig.3.5.2.
Turn on the unit,without Timer
activated
Press Timer repeatedly unitll go
to the setting status
Press ▲/▼ to adjust the time
Press Enter/Cancel to conrm this settingPress Timer to cancel this setting
To Next Page
Loading...
Need help?
General
